Cordless Wet Dry Self-Cleaning Smart Vacuum Mop Cleaner

W90 FAQ

1. Can use bleach or cleaning solution in the machine to clean floors?

We would not recommend using bleach or cleaning solution in this machine as it could damage the machine.

2. What kind of floors it can be used on?

The ILIFE W90 can be used on non-carpeted floor such as vinyl, tile, and sealed wood floors.

3. Can this be used for dry vacuuming? Can you just vacuum without using water?

The ILIFE W90 can be used without water for dry vacuuming. Ideally you would want to use the ILIFE W90 with water to automatically adjust clean water flow to ensure an ideal cleaning result without using water.

4. How often do I need to clean the roller brush?

We recommend cleaning the roller brush after each use.

5. Does animal hair get wrapped around roller?

Normally this does not happen because the roller brush diameter size is big enough so it can avoid getting tangled. If there is a tangle, just remove the roller brush from its holder and use the cleaning tool to remove the hair tangle from the roller brush.

6. Do you have to use distilled water?

There is no need to use distilled water. Tap water is perfectly fine to use in the ILIFE W90. Please do not use hot water as this can cause internal damage to the pipes in the ILIFE W90.

7. Where should I store the ILIFE W90?

We recommend storing the ILIFE W90 on the storage tray that is provided with the ILIFE W90. The storage tray allows the self-cleaning function to work more easily as the tray was designed to fit the bottom of the ILIFE W90.

8. Can I adjust the flow of water coming out?

The ILIFE W90 automatically adjusts the solution and water flow to ensure you have an ideal cleaning experience. If you want stronger cleaning power, you can enter MAX mode while the machine is cleaning, adjust the water flow, and fan speed to the maximum.

9. Do you have to vacuum an area first before using the ILIFE W90?

There is no need to vacuum an area first because the ILIFE W90 can vacuum and wash the floor simultaneously.

10. How do you start self-cleaning mode?

To start the ILIFE W90's self-cleaning mode, please follow the following steps: Always keep the floor washer plugged in. Place the floor washer on the storage tray. Empty the Dirty Water Tank. The Clean Water Tank should be at least 1/3 full of water. Press self-cleaning button at the top of the handle to start the brush roll self-cleaning mode. The floor washer will automatically shut off once finished. The entire self-cleaning process takes about 60 seconds.